Tools You Need:
1. Utility knife
2. Power Screw Gun
Pet Door Insert Panel Installation 2014-2018
No Cutting Required<> It Inserts<> In Minutes
EXTERIOR (WET) WINDOW FRAME
HAS PRE- ADHERED GLAZING SEALANT
INTERIOR (DRY) WINDOW FRAME
HAS PRE- DRILLED HOLES FOR SCREWS & COVERS
TEMPERED GLASS PANEL WITH NOTCH FOR PET DOOR
PET DOOR/ SELECTIVE SIZE AND BRAND
SCREWS BY ODL
SCREW COVERS/ PLUGS
NOTE: Upgrade Pet Doors do not ship attached to the glass insert due to the high risk of glass breakage. Upgrade pet doors must ship in separate box. The glass cut/ notch out is sized for your pet door. Please Follow Manufacture Guidelines For Attachment.
Remove all packaging and protective covering of items.
Lay the interior/ dry frame down on a large flat surface.
Place glass panel onto the dry frame in its designated position.
Now place the Exterior/ Wet frame over the glass panel to attach to the Interior/ Dry frame using its unique connect system for proper alignment.
Turn over the complete unit so the Exterior/ Wet frame is now down on the flat surface. Allow to set approximately one to two minutes for the glass to adhere to the Exterior/ Wet frame unit. Then remove the interior/ Dry frame.
You are ready to properly insert and install you DoorGlass 4Pets Pet Panel Installation System and remaining components.
Support Line: Text for help to ... 972-464-7747